pint.models.solar_wind_dispersion.SolarWindDispersion

class pint.models.solar_wind_dispersion.SolarWindDispersion[source]

Bases: SolarWindDispersionBase

Dispersion due to the solar wind (basic model).

The model is a simple spherically-symmetric model that is fit in its constant amplitude.

For SWM==0 it assumes a power-law index of 2 (Edwards et al.)

For SWM==1 it can have any power-law index (You et al., Hazboun et al.), which can also be fit

Parameters supported:

Name / Aliases	Description	Kind
NE_SW / NE1AU, SOLARN0	Solar Wind density at 1 AU	1 / cm3
SWP	Solar Wind Model radial power-law index (only for SWM=1)	number
SWM	Solar Wind Model (0 is from Edwards+ 2006, 1 is from You+2007,2012/Hazboun+ 2022)	number

References

Edwards et al. 2006, MNRAS, 372, 1549; Setion 2.5.4
Madison et al. 2019, ApJ, 872, 150; Section 3.1.
Hazboun et al. (2022, ApJ, 929, 39)
You et al. (2012, MNRAS, 422, 1160)

Methods

`add_param`(param[, deriv_func, setup])	Add a parameter to the Component.
`d_delay_d_dmparam`(toas, param_name[, acc_delay])	Derivative of delay wrt to DM parameter.
`d_delay_d_ne_sw`(toas, param_name[, acc_delay])
`d_delay_d_swp`(toas, param_name[, acc_delay])
`d_dm_d_ne_sw`(toas, param_name[, acc_delay])	Derivative of of DM wrt the solar wind ne amplitude.
`d_dm_d_swp`(toas, param_name[, acc_delay])
`d_solar_wind_geometry_d_swp`(toas, param_name)	Derivative of solar_wind_geometry (path length) wrt power-law index p
`dispersion_slope_value`(toas)
`dispersion_time_delay`(DM, freq)	Return the dispersion time delay for a set of frequency.
`dispersion_type_delay`(toas)
`dm_value`(toas)	Compute modeled DM value at given TOAs.
`get_max_dm`()	Return approximate maximum DM from the Solar Wind (at conjunction)
`get_min_dm`()	Return approximate minimum DM from the Solar Wind (180deg away from conjunction)
`get_params_of_type`(param_type)	Get all the parameters in timing model for one specific type.
`get_prefix_mapping_component`(prefix)	Get the index mapping for the prefix parameters.
`is_in_parfile`(para_dict)	Check if this subclass included in parfile.
`match_param_aliases`(alias)	Return the parameter corresponding to this alias.
`param_help`()	Print help lines for all available parameters in model.
`print_par`([format])	param format: Parfile output format. PINT outputs the 'tempo', 'tempo2' and 'pint'
`register_deriv_funcs`(func, param)	Register the derivative function in to the deriv_func dictionaries.
`register_dm_deriv_funcs`(func, param)	Register the derivative function in to the deriv_func dictionaries.
`remove_param`(param)	Remove a parameter from the Component.
`set_special_params`(spcl_params)
`setup`()	Finalize construction loaded values.
`solar_wind_delay`(toas[, acc_delay])	This is a wrapper function to compute solar wind dispersion delay.
`solar_wind_dm`(toas)	Return the solar wind dispersion measure.
`solar_wind_geometry`(toas)	Return the geometry of solar wind dispersion.
`validate`()	Validate loaded values.
`validate_toas`(toas)	Check that this model component has TOAs where needed.

Attributes

`aliases_map`	Return all the aliases and map to the PINT parameter name.
`category`
`component_types`
`free_params_component`	Return the free parameters in the component.
`param_prefixs`
`register`

setup()[source]: Finalize construction loaded values.

solar_wind_geometry(toas)[source]

Return the geometry of solar wind dispersion.

For SWM==0:

Implements the geometry part of equations 29, 30 of Edwards et al. 2006, (i.e., without the n0, the solar wind DM amplitude part.) Their rho is given as theta here.

rvec: radial vector from observatory to the center of the Sun pos: pulsar position

For SWM==1:

Implements Eqn. 11 of Hazboun et al. (2022)

Parameters:: toas (pint.toa.TOAs) –
Return type:: astropy.quantity.Quantity

solar_wind_dm(toas)[source]

Return the solar wind dispersion measure.

SWM==0:: Uses equations 29, 30 of Edwards et al. 2006.
SWM==1:: Hazboun et al. 2022

solar_wind_delay(toas, acc_delay=None)[source]: This is a wrapper function to compute solar wind dispersion delay.

d_dm_d_ne_sw(toas, param_name, acc_delay=None)[source]: Derivative of of DM wrt the solar wind ne amplitude.

d_solar_wind_geometry_d_swp(toas, param_name, acc_delay=None)[source]

Derivative of solar_wind_geometry (path length) wrt power-law index p

The evaluation is done using Eqn. 12 in Hazboun et al. (2022). The first term involving hypergeometric functions (_hypergeom_function()) has the derivative computed approximately using a Pade expansion (_d_hypergeom_function_dp()). The second uses gamma functions (_gamma_function()) and has the derivative computed using polygamma functions (_d_gamma_function_dp()).

print_par(format='pint')[source]

Parameters:: format (str, optional) – Parfile output format. PINT outputs the ‘tempo’, ‘tempo2’ and ‘pint’ format. The defaul format is pint. Actual formatting done elsewhere.
Returns:: str
Return type:: formatted line for par file

get_max_dm()[source]

Return approximate maximum DM from the Solar Wind (at conjunction)

Simplified model that assumes a circular orbit

Return type:: astropy.quantity.Quantity

get_min_dm()[source]

Return approximate minimum DM from the Solar Wind (180deg away from conjunction)

Simplified model that assumes a circular orbit

Return type:: astropy.quantity.Quantity

add_param(param, deriv_func=None, setup=False)

Add a parameter to the Component.

The parameter is stored in an attribute on the Component object. Its name is also recorded in a list, self.params.

Parameters:

param (pint.models.Parameter) – The parameter to be added.
deriv_func (function) – Derivative function for parameter.

property aliases_map

Return all the aliases and map to the PINT parameter name.

This property returns a dictionary from the current in timing model parameters’ aliase to the pint defined parameter names. For the aliases of a prefixed parameter, the aliase with an existing prefix index maps to the PINT defined parameter name with the same index. Behind the scenes, the indexed parameter adds the indexed aliase to its aliase list.

d_delay_d_dmparam(toas, param_name, acc_delay=None)

Derivative of delay wrt to DM parameter.

Parameters:

toas (pint.TOAs object.) – Input toas.
param_name (str) – Derivative parameter name
acc_delay (astropy.quantity or numpy.ndarray) – Accumulated delay values. This parameter is to keep the unified API, but not used in this function.

dispersion_time_delay(DM, freq)

Return the dispersion time delay for a set of frequency.

This equation if cited from Duncan Lorimer, Michael Kramer, Handbook of Pulsar Astronomy, Second edition, Page 86, Equation [4.7] Here we assume the reference frequency is at infinity and the EM wave frequency is much larger than plasma frequency.

dm_value(toas)

Compute modeled DM value at given TOAs.

Parameters:

toas (TOAs object or TOA table(TOAs.table)) –

If given a TOAs object, it will use the whole TOA table in the: TOAs object.

Return type:

DM values at given TOAs in the unit of DM.

property free_params_component

Return the free parameters in the component.

This function collects the non-frozen parameters.

Return type:: A list of free parameters.

get_params_of_type(param_type): Get all the parameters in timing model for one specific type.

get_prefix_mapping_component(prefix)

Get the index mapping for the prefix parameters.

Parameters:: prefix (str) – Name of prefix.
Returns:: A dictionary with prefix parameter real index as key and parameter name as value.
Return type:: dict

is_in_parfile(para_dict)

Check if this subclass included in parfile.

Parameters:: para_dict (dictionary) – A dictionary contain all the parameters with values in string from one parfile
Returns:: Whether the subclass is included in the parfile.
Return type:: bool

match_param_aliases(alias)

Return the parameter corresponding to this alias.

Parameters:: alias (str) – Alias name.

Note

This function only searches the parameter aliases within the current component. If one wants to search the aliases in the scope of TimingModel, please use TimingModel.match_param_aliase().

param_help(): Print help lines for all available parameters in model.

register_deriv_funcs(func, param)

Register the derivative function in to the deriv_func dictionaries.

Parameters:

func (callable) – Calculates the derivative
param (str) – Name of parameter the derivative is with respect to

register_dm_deriv_funcs(func, param)

Register the derivative function in to the deriv_func dictionaries.

Parameters:

func (callable) – Calculates the derivative
param (str) – Name of parameter the derivative is with respect to

remove_param(param)

Remove a parameter from the Component.

Parameters:: param (str or pint.models.Parameter) – The parameter to remove.

validate(): Validate loaded values.

validate_toas(toas): Check that this model component has TOAs where needed.